S9S12ZVL32F0MLFR NXP
Available
S9S12ZVL32F0MLFR NXP
• S12Z CPU core • 128, 96, 64, 32, 16 or 8 KB on-chip flash with ECC
• 2048, 1024, 128 byte EEPROM with ECC
• 8192, 4096, 1024 or 512 byte on-chip SRAM with ECC
• Phase locked loop (IPLL) frequency multiplier with internal filter
• 1 MHz internal RC oscillator with +/-1.3% accuracy over rated temperature range
• 4-20 MHz amplitude controlled pierce oscillator
• Internal COP (watchdog) module
• analog-to-digital converter (ADC) with 10 -bit or 12 -bit resolution and up to 10 channels available on external pins and Vbg (bandgap) result reference
• PGA module with two input channels
• One 8-bit 5V digital-to-analog converter (DAC)
• One analog comparators (ACMP) with rail-to-rail inputs
• MSCAN (1 Mbit/s, CAN 2.0 A, B software compatible) module
• One serial peripheral interface (SPI) module
• One serial communication interface (SCI) module with interface to internal LIN physical layer transceiver (with RX connected to a timer channel for frequency calibration purposes, if desired)
• Up to one additional SCI (not connected to LIN physical layer)
• One on-chip LIN physical layer transceiver fully compliant with the LIN 2.2 standard
• 6-channel timer module (TIM0) with input capture/output compare
• 2-channel timer module (TIM1) with input capture/output compare
• Inter-IC (IIC) module
• 8-channel Pulse Width Modulation module (PWM)
• On-chip voltage regulator (VREG) for regulation of input supply and all internal voltages
• Autonomous periodic interrupt (API), supports cyclic wakeup from Stop mode
• Pins to support 25 mA drive strength to VSSX
• Pin to support 20 mA drive strength from VDDX (EVDD)
• High Voltage Input (HVI)
• Supply voltage sense with low battery warning
• On-chip temperature sensor, temperature value can be measured with ADC or can generate a high temperature warning
• Up to 23 pins can be used as keyboard wake-up interrupt (KWI)
• S12Z CPU core • 128, 96, 64, 32, 16 or 8 KB on-chip flash with ECC
• 2048, 1024, 128 byte EEPROM with ECC
• 8192, 4096, 1024 or 512 byte on-chip SRAM with ECC
• Phase locked loop (IPLL) frequency multiplier with internal filter
• 1 MHz internal RC oscillator with +/-1.3% accuracy over rated temperature range
• 4-20 MHz amplitude controlled pierce oscillator
• Internal COP (watchdog) module
• analog-to-digital converter (ADC) with 10 -bit or 12 -bit resolution and up to 10 channels available on external pins and Vbg (bandgap) result reference
• PGA module with two input channels
• One 8-bit 5V digital-to-analog converter (DAC)
• One analog comparators (ACMP) with rail-to-rail inputs
• MSCAN (1 Mbit/s, CAN 2.0 A, B software compatible) module
• One serial peripheral interface (SPI) module
• One serial communication interface (SCI) module with interface to internal LIN physical layer transceiver (with RX connected to a timer channel for frequency calibration purposes, if desired)
• Up to one additional SCI (not connected to LIN physical layer)
• One on-chip LIN physical layer transceiver fully compliant with the LIN 2.2 standard
• 6-channel timer module (TIM0) with input capture/output compare
• 2-channel timer module (TIM1) with input capture/output compare
• Inter-IC (IIC) module
• 8-channel Pulse Width Modulation module (PWM)
• On-chip voltage regulator (VREG) for regulation of input supply and all internal voltages
• Autonomous periodic interrupt (API), supports cyclic wakeup from Stop mode
• Pins to support 25 mA drive strength to VSSX
• Pin to support 20 mA drive strength from VDDX (EVDD)
• High Voltage Input (HVI)
• Supply voltage sense with low battery warning
• On-chip temperature sensor, temperature value can be measured with ADC or can generate a high temperature warning
• Up to 23 pins can be used as keyboard wake-up interrupt (KWI)
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.
